Factory source Diy Vertical Wind Turbine – China factory vertical axis 1000W 1kw 48v 96v 120V wind turbine generator complete system – Flyt Detail:
Features
1, Curved blade design, utilizes wind resource effectively and obtains a higher power generation.
2, Coreless generator, Horizontal rotation and aircraft wing design reduce the noise to an unper-ceivable level in natural environment.
3, Wind resistance. Horizontal rotation and triangular double fulcrum design make it only bear a- small wind pressure even in strong wind.
4, Rotation radius. smaller rotation radius than other types of wind turbines, space is saved while efficiency improved.
5, Effective wind speed range. special control principle expended the wind speed to 2.5 ~ 25m/s, utilizes wind resource effectively and obtains a higher power generation.
Specifications
| item | 1.3m/s | |||
| Started wind speed | 2.5m/s | |||
| Cut-in wind speed | 10m/s | |||
| Rated Wind speed | 48v/96v/120v | |||
| Rated voltage (AC) | 1000w | |||
| Rated power(W) | 1050w | |||
| Max power(W) | 1.6m | |||
| Wheel diameter(m) | 1.92m | |||
| Blades height(m) | <96kg | |||
| weight | 1.3m/s | |||
| Safe wind speed | ≤40m/s | |||
| Blades quantity | 2 | |||
| Blade material | glass/basalt | |||
| Generator | Three phase permanent magnet suspension motor | |||
| Control System | Electromagnet | |||
| Generator protection grade | IP54 | |||
| Work environment temperature | -25~+45ºC, | |||
| Altitude: | ≤4500m | |||
| Overspeed protection | Electromagnetic brake | |||
| Overload protection | Electromagnetic brake and the unloading unit | |||
Preparation
3-1 Open the package, make sure no components has been missed, everything is in good condition. Make sure your system is designed rationally, materials are good quality, installers/workers have sufficient electrical acknowledge.
3-2 Please weld the DN25 flange(in the package) to an iron tube to make a standing pole. Plant the standing pole on the roof , the hill or an open ground with good wind condition.
3-3 Connect any two of the generator’s three wires to a voltage meter, rotate the generator to see whether the voltage come out. Rotate the generator faster to see whether the voltage goes higher. Then short-circuit the 3 wires before installation, make sure the blades would not be rotated by the wind.
3-4 Please don’t install the turbine in bad weather, such as rain, heavy wind, sand-storm, etc, which may damage the turbine or hurt the installers.
3-5 Please first connect the battery/load to the controller, second connect the turbine to the controller, third relieve the short-circuit status, let the turbine rotates freely.
3-6 Check whether is any dithering, vibration, swing or noise while working, try to solve it or ask for advice from the supplier.
Product detail pictures:
Related Product Guide:
Sticking to the perception of "Creating products of top of the range and earning mates with people today from all over the world", we constantly put the desire of consumers in the first place for Factory source Diy Vertical Wind Turbine – China factory vertical axis 1000W 1kw 48v 96v 120V wind turbine generator complete system – Flyt, The product will supply to all over the world, such as: Poland, Mauritius, Slovenia, Due to the stability of our items, timely supply and our sincere service, we are able to sell our merchandise not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
By Karl from Hanover - 2017.01.11 17:15
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Amber from Sao Paulo - 2018.11.02 11:11